Tom's Hardware is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us

By Christian Eberle published 28 June 22

The Sony Inzone U27M90 is one terrific gaming monitor. It delivers a super-sharp and colorful picture that hits all the specs without calibration. Premium video processing makes it a great tool for PC or console gaming. And it comes in at an attractive price that undercuts the competition.

Bright, sharp and contrasty image

Unique styling that compliments the PS5

A Sony computer monitor? Now that’s something many enthusiasts aren’t old enough to remember. In the 1990s, Sony marketed a line of Trinitron CRT screens. Their main draw was that they only curved on the vertical axis, which meant they were the closest thing to a flat-screen you could buy at the time. NEC used the same picture tube in its Multisync line, of which I owned a 16-inch version. It was the best CRT monitor I ever owned.

Thirty years later, Sony is well known for its televisions and for the PlayStation 5 (PS5) gaming console. It was inevitable that it would jump into the gaming monitor party with something optimized for that product. The Inzone U27M90 is a 27-inch IPS panel with 4K resolution, 144 Hz, Adaptive-Sync, HDR, extended color AND (drum roll, please), a full-array backlight with 96 dimming zones. Priced at under $1,000, the Sony Inzone U27M90 is making a strong case for inclusion on our best 4K gaming monitor list!

There is no shortage of 4K/144 Hz screens vying for gaming enthusiasts’ attention. With many models under $1,000, and available in 27, 28 and 32-inch sizes, you don’t have to look far for something that will compliment a PlayStation, Xbox or PC gaming system. However, Sony isn’t just offering a me-too product. The U27M90 is one of the least expensive 4K monitors to include a full-array local-dimming (FALD) LED backlight. With 96 zones, it delivers some killer HDR contrast. I measured over 22,000:1 in my tests and you can get similar performance for SDR content because the zone-dimming feature is available in all signal modes. Peak HDR output is rated at 600 nits, but I measured over 850 in testing.

According to my measurements, the color gamut covers just under 90% of DCI-P3, with excellent accuracy in two of the picture modes. I was also able to calibrate one of the Game modes to a high standard. The IPS panel’s native contrast is around 1,000:1, which is typical of the genre. But using the local dimming feature for SDR content pushed that to over 6,000:1 without any penalties like crushed detail or blown-out whites. Sony has tuned the U27M90 very well.

Video processing is given equally close attention. 144 Hz is supported over the DisplayPort 1.4 input, while two HDMI 2.1 ports accept up to 120 Hz (see HDMI vs DisplayPort to decide which is best). FreeSync Premium Pro and G-Sync compatibility were confirmed in my tests in both SDR and HDR modes. Nvidia does not yet have this monitor on its certified list, but since there’s a G-Sync logo on the front bezel, I suspect it’s only a matter of time. I also found an effective overdrive that reduces motion blur. The only omission here is a backlight strobe feature. Though I don’t consider that a big deal, some users prefer it over Adaptive-Sync. At 144 Hz, I find Adaptive-Sync to be more useful in keeping motion resolution high.

Gaming features include a set of aiming crosshairs, timers, a frame rate counter and an auto picture mode setting that detects the presence of a PS5 and sets the Game mode automatically. It is claimed to have lower input lag than the other modes. There’s a KVM feature with USB-C and traditional USB ports to support multiple systems like a PC and a PS5, which is enough to accommodate various peripherals like controllers, mice and keyboards. And if you want to control the U27M90 from the Windows desktop, Sony makes its Inzone Hub app available.

The U27M90 arrived in an unassuming brown carton that could have held any number of enterprise screens rather than a high-end gaming display. Retrieving the contents from the crumbly foam inserts, I immediately noticed the PS5 styling cues. This monitor has a unique look and feel. I had to root around in the box to find the two tiny screws that secured the base to the upright. I would have liked to see them captive in their holes rather than in a minuscule ziplock bag that can easily be lost. The power supply is a large brick. As I got an early sample, it didn’t have any other cables included.

PS5 owners will love how well the U27M90 integrates with the futuristic look of their console. The same flowing white surfaces accented by recessed black transitions are found on the monitor. The back of the panel is entirely white with a large input panel at the bottom, inset in black with clear labels for the connections. There are two HDMI 2.1 ports, a DisplayPort 1.4, a USB-C, 3.5mm audio jack and three USB ports, one upstream and two down. USB-C can be used for video and accepts 4K signals up to 144 Hz with Adaptive-Sync and HDR.

Also in back is the U27M90’s lighting feature. It’s a long strip that glows softly in any one of 14 colors. You can also turn on a power LED, but it’s hidden around the lower right side, invisible from the front. If you reach around that corner, you’ll find a power toggle button and the OSD joystick. Under the panel-to-upright interface is a 100mm VESA mount with four bolts included to use with aftermarket solutions.

The stand is unique in my experience. The upright sits at an angle supported by two metal legs while the panel’s height adjustment of 70mm rides up and down as if on a ramp. It’s interesting because as you move the panel up, it gets farther away from you, not by much, but you might have to pull it forward to compensate. At maximum height, the panel is a little too low for vertical placement. I had to angle it upwards a bit to my eyepoint. The back tilt maxes out at 25 degrees and there is no swivel or portrait mode.

The U27M90’s OSD can be navigated with a handy joystick or by using Sony’s Inzone Hub app. The app covers the monitor’s menu system and can save configurations for individual games that include settings for the headphone audio.

There are five SDR picture modes, of which Cinema is the default. It is very color accurate but has a slightly darkened gamma which some users may prefer. Standard looks a bit lighter in tone and is also color accurate. To calibrate, select one of the Game modes. They unlock a set of gamma presets, color temps and saturation/hue controls. If you turn Auto Picture mode on, the U27M90 will switch to Game 1 when a PS5 is connected.

Gaming Assist includes red and green aiming points, a countdown timer, frame rate indicator, Adaptive-Sync toggle, three-level overdrive and Black Equalizer for exposing hard-to-see shadow detail. The overdrive is best left on its lowest setting. Higher options cause visible ghosting trails behind moving objects.

You can adjust many picture parameters in the two Game modes. Local Dimming has two settings that are more or less aggressive in their operation. I used High to good effect in both SDR and HDR modes. Though there are only 96 dimming zones, the FALD backlight is far more effective in controlling contrast than the edge dimming or backlight modulation found in some other HDR monitors. At this price point, you won’t find a better dynamic range in a 4K display.

The input selector includes a USB-C option, and you can leave auto select on to avoid a trip to the OSD to switch sources. USB-C includes all the features and capabilities of DisplayPort.

The KVM menu assigns the peripherals to one of the four video inputs. This allows the user to use a single keyboard and mouse for multiple systems. You can also set the USB ports to remain active for charging when the monitor is turned off.

The rear LED bar emits a soft glow in one of 14 colors. The only effect is static; you can turn off the light if desired.

The U27M90 can be enjoyed without calibration in either Cinema, the default, or Standard modes. No matter your choice, the full DCI-P3 color gamut is employed. I did not find an sRGB option. Cinema has a darker gamma of around 2.3, which helps color look a bit more saturated. Standard sticks to the 2.2 standard and therefore appears a tad lighter. If you want to calibrate, select Game 1 or 2 to unlock gamma, color temp and hue/saturation controls. There is little need for this, but a tiny improvement can be made if you want to satisfy your inner tweaker. My test settings are below. HDR signals lock out all picture controls, but I found it measured very accurately as well.

The U27M90 is Sony’s first desktop computer monitor in a while, but you’d never know that when using it. It is a fully realized product with much to offer, and then some, as a display from one of the top display companies like Asus or Acer. In daily use, it renders the Windows desktop with razor-sharp clarity and beautifully saturated color. Though SDR is technically supposed to be matched with the sRGB standard, today’s wide gamut screens have largely erased that option. The U27M90 doesn’t have an sRGB mode, but that wasn’t a problem for my daily tasks of document editing, spreadsheets or Photoshop work. I left the Local Dimming on high for all SDR content and was rewarded with contrast that rivaled the best VA screens I’ve reviewed.

I settled on my calibrated Game 1 mode for all SDR material. It gave me the best color balance for video and gaming as well as ideal luminance and contrast for all uses. I tried Cinema and found it good for bright video content but a little murky for darker scenes. Its higher gamma value is the culprit there. It was easy to select a darker gamma option in Game 1 mode since the gamma control is available. In Cinema and Standard, it’s not.

Gaming is why we’re here, and I was mightily impressed with the performance. Doom Eternal looked incredibly sharp and tactile in HDR mode. I didn’t have to adjust the in-game sliders to make all detail pop from the brightest highlights to the deepest shadows. The image was vibrant and vivacious, coupled with rich color. Unfortunately, I didn’t have a PS5 on hand, but my PC test system and its GeForce RTX 3090 video card delivered some seriously fun gameplay.

Sony made no missteps in the video processing department. The U27M90’s Adaptive-Sync worked perfectly on both FreeSync and G-Sync platforms. I was able to run G-Sync over HDMI at 120 Hz and DisplayPort at 144 Hz, with HDR in both cases. Frame rates were 120fps and higher, which gave me smooth and responsive motion with no visible artifacts. The overdrive worked perfectly on its lowest setting and showed no distracting blur.

Comparing the SDR and HDR versions of Call of Duty WWII, I found the SDR version looked quite good and easily matched what I’d seen on the best VA screens. The U27M90’s Local Dimming worked flawlessly to deepen black levels and expand contrast to create greater impact. HDR had even broader contrast, of course, with more color saturation. When I fired up an Acer X27 for comparison, it was hard to see a difference between the two images. The Sony gives up about 300 nits peak brightness in HDR mode, but I could not tell in most content. Only the tiniest highlights were slightly brighter on the Acer.

There is no question that Sony has hit a homerun here. The U27M90 easily competes with more expensive FALD-backlight monitors and handily outdistances its similarly priced competition in HDR quality.

Current page: Features and Specificatins

Christian Eberle is a Contributing Editor for Tom's Hardware US. He's a veteran reviewer of A/V equipment, specializing in monitors.

Get instant access to breaking news, in-depth reviews and helpful tips.

Thank you for signing up to Tom's Hardware. You will receive a verification email shortly.

There was a problem. Please refresh the page and try again.

Tom's Hardware is part of Future US Inc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab) .

© Future US, Inc. Full 7th Floor, 130 West 42nd Street, New York, NY 10036.